|Home||» Products||» Magnetic Products||» MAGNETIC PLATEN|
MAGNETIC PLATEN (MTC-366)
|Magnetic Platen works on the ELECTRO PERMANENT MAGNETIC SYSTEM that develops very high magnetic force. The electrical control equipment is only to activate & de-activate the magnets inside the platen i.e. it will not loose it's magnetic power in case of power failure. It doesn't requires power once it is magnetized.|
|To mount a mould, the operator has to match the mould base to the locator ring on stationery platen, then bring the moving platen in until it touches the rear mould plate. Now, the operator has to magnetize the mould, remove the straps holding the mould halves together and then pull the moving platen back. The machine and mould are now ready for production.|
|Atypical magnetic mould change involves bringing both mould halves together, securing the mould halves;|
demagnetizing the platen & then lifting the mould out of the press by suitable means.