Cookie Img
Back to top
Send SMS Send Inquiry
Home » Products » Machine Vices » UNIVERSAL DIVIDING HEAD TYPE BJUDH-135

UNIVERSAL DIVIDING HEAD TYPE BJUDH-135

UNIVERSAL DIVIDING HEAD TYPE BJUDH-135
Product Code : MTC-229
Product Description

Universal Dividing Head Type Bjudh-135 (Mtc-229)

The Universal Dividing Head, Type Bjudh-135 Is A Very Useful Accessory For All Machine Shops Especially For Tool Room Work. It Can Be Used On Milling, Drilling And Grinding Machines For A Variety Of Operations. It Has A Wide Range Of Application In Tool Manufacture, Jigs And Fixtures, Gears, Splines, Polygonal Components, Milling Cutters Etc.

The Universal Dividing Head Is Rigid In Construction. It Consists Of Close Grained Heavy Duty Cast Iron Housing And Body. The Main Spindle Is Hardened And Ground. The Worm And Wheel Run In Oil Bath To Reduce The Wear Minimum.

The Universal Dividing Head Can Be Used For Holding Components, Either Between Centres Or With 3 Jaw Chuck As Well As On The Mandrel. The Main Spindle Has Mt4 Taper With A Through Bore Of 25Mm. For Holding Long Components. The Spindle Nose Is Threaded For Mounting Chuck Flange And The Threads Are Protected By A Knurled Nut While Operating Without Chuck. The Spindle Can Be Locked During Machining By Means Of The Locking Lever Thereby Keeping The Worm And Worm Wheel Free From Machining Loads.
    
Direct Indexing


A Double Sided Notch Plate With 24 Notches On One Side And 5 & 7 Notches On The Other Side Is Provided For Giving 2, 3, 4, 5, 6, 7, 8, 12 And 24 Divisions. Please Note That During Direct Indexing The Worm And The Worm Wheel Should Be Disengaged.

Indirect Indexing
     
Indirect Indexing Is Through The Worm And Worm Wheel (Transmission Ratio 1:40) By Using Double Sided Index Plate All Divisions Up To 50 And Many Divisions From 51 To 400 Can Be Obtained.
     
Differential Indexing

By Means Of The Change Gear Wheels All Divisions Upto 400, Particularly The Divisions Which Cannot Be Obtained By Indirect Indexing Method, Can Be Obtained. This Can Be Carried Out When Spindle Is In Horizontal Position Only.
     
Spiral Milling
     Spiral Milling Can Be Carried Out By Connecting The Dividing Head Spindle To The Table Lead Screw Of The Machine By Means Of Change Gear Quadrant And Train Of Gears.

Specifications:-

  1. Transmission Ratio  :  1:40
  2. Centre Height  :  135 Mm.
  3. Overall Length Of Dividing Head Without Chuck  :  450 Mm.
  4. Overall Length Of Tailstock  :  275 Mm.
  5. Base Area Of Dividing Head  :  225 X 145 Mm.
  6. Base Area Of Tailstock  :  170 X 110 Mm.
  7. Overall Height Of Dividing Head  :  245 Mm.
  8. Overall Height Of Tailstock  :  155 Mm.
  9. Weight (Approx)  :  70 Kgs.

Standard Accessories

  • 1 Tailstock 1 Carrier 2 Centres
  • 1 Direct Indexing Double Sided Plate With 24 Notches On One Side And 5 & 7 Notches On The Other Side
  • 1 Double Sided Index Plate For Indirect Indexing
  • 15 Change Gears With Bore Size 25Mm.
  • 1 Change Gear Quadrant For Mounting Of Change Gears
  • 1 Box Spanner 

Special Accessories

  •     1 Pair Of Height Blocks For Dividing Head And Tailstock For Increasing Centre Height To 160 Mm.
  •     1 Pair Of Height Blocks For Dividing Head And Tailstock For Increasing Centre Height To 200 Mm.
  •     1  3 Jaw Self Centering Chuck 160Mm With Flange.
  •     1  Center Steady.


 


CSV Work Holding

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.